Remove a Railcar with AEI Scanner for YTM

Remove a Railcar with AEI Scanner for YTM

Removing a car removes the car ID from the scanning device. This can be done when there is an incorrect ID in the scanner.

  1. Select the railcar(s) to remove.
  2. Select Remove Railcar.

    • Related Articles

    • Using the AEI Scanner for YTM

      Actions you perform (Inbound/Outbound/Move) are performed on all scanned cars. Once you perform an action, all scanned car IDs are removed from the device.  When you Inbound/Outbound/Move cars/Scan seals, this information is sent to YTM when the ...

    • Inbound a Car with AEI Scanner for YTM

      Actions you perform (Inbound/Outbound/Move) are performed on all scanned cars. Once you perform an action, all scanned car IDs are removed from the device.  When you Inbound/Outbound/Move cars/Scan seals, this information is sent to YTM when the ...

    • Add a Railcar Manually to AEI Scanner for YTM

      Select Add Railcar. Enter the Railcar ID. The car is added to the scanning device.

    • Move a Car with AEI Scanner for YTM

      Actions you perform (Inbound/Outbound/Move) are performed on all scanned cars. Once you perform an action, all scanned car IDs are removed from the device.  When you Inbound/Outbound/Move cars/Scan seals, this information is sent to YTM when the ...

    • Scan a Seal with AEI Scanner for YTM

      You can scan seals using the AEI device. Once scanned, these seals are associated with the car in YTM and will automatically be transferred to the car’s waybill. Select Action, then Seals. Point the device towards the seal, then click the barcode ...